Aller au contenu

HP-3042 Multifunctional 3D Vacuum Heat Press Machine

Core Abstract The HP-3042 is a multifunctional 3D vacuum heat press machine built for high-efficiency, all-in-one heat transfer onto 3D phone cases, mugs, water bottles, and other irregularly shaped sublimation products. It is best suited to personalized phone-case customization shops, cultural-creative gift companies, scenic-area souvenir retailers, and cross-border e-commerce DIY sellers. Its core advantages include a large 300×420×110 mm vacuum chamber that prints up to 12 mugs per cycle (12× the throughput of a single-station mug press), a 108° flip-top clamshell for fast loading and unloading, dense upper/lower convex-dot heating surfaces with far-infrared technology for uniform, vivid color reproduction, and a built-in high-stability vacuum pump that delivers seamless, white-edge-free 3D wrapping without an external air compressor.

I. Product Overview

1. Product Category

  • Equipment Name: Multifunctional 3D Vacuum Heat Press Machine
  • Model: HP-3042
  • Equipment Positioning: A high-efficiency, multifunctional heat-transfer workstation. It perfectly solves the transfer and customization challenges of 3D phone cases, irregular mugs, and water bottles that traditional flat presses cannot print.
  • Form Factor: 108° Flip-Top Vacuum Chamber Structure. The large internal cavity and wide opening angle allow fast loading and unloading of products, maximizing time savings in operation.

2. Applications

  • Industry Applications: Widely used in personalized phone-case customization shops, cultural-creative gift companies, scenic-area souvenir retail stores, and cross-border e-commerce DIY sellers.
  • Printing Scope: Suitable for 3D phone cases, mugs, water bottles, etc. (substrates must be heat-resistant and have a sublimation coating).
  • Max Single-Batch Capacity: Up to 12 mugs per cycle.

3. Core Functions

  • Far-Infrared Heating with Upper/Lower Convex-Dot Design: The upper and lower chamber surfaces use dense convex-dot heating planes that greatly increase the heating area. Combined with far-infrared heating technology, every temperature is even and transfer images show highly faithful color reproduction.
  • Vacuum Suction & Air Heat Conduction: A built-in vacuum pump generates strong suction, working with a high-temperature-resistant silicone vacuum membrane to tightly wrap the pattern paper around irregular product surfaces, achieving dead-corner-free, crisp, and textured 3D embossing.
  • Intelligent Constant Temperature: Uses smart temperature control with automatic regulation; heating automatically cuts off when the temperature exceeds the transfer limit.

II. Core Advantages

  • 12× High Efficiency vs. Traditional Mug Presses: The large-format chamber design (300×420×110 mm) can transfer 12 mugs at once (using mugs as an example). Compared with a traditional single-station mug press, efficiency is increased a full 12 times.
  • Perfect 3D Edge Transfer: Ordinary flat presses can only print the back of a phone case, leaving white edges on the sides. The HP-3042 uses strong vacuum suction to keep the transfer film tightly against the phone-case edges, achieving truly white-edge-free, fully wrapped 3D transfer.
  • User-Friendly Operation Interface: Turn on the Power key, load the product, set time and temperature, turn on upper/lower heating, press the "Vacuum" key; once the machine reaches working temperature after vacuuming completes, press the countdown key to start printing. A beeping sound indicates the print is complete.

III. Technical Specifications

Items Specifications
Model HP-3042
Working Size 30×42×11CM/11.8×16.5×4.3"
Heating Plate Power 1300W
Power 2800W
Voltage 110V/220V
Packaging Dimension 70×64×42CM/27.6×25.2×16.5"
Gross Weight 26KG/57.3LB

IV. Operation & Workflow

1. Required Materials

  • Media: Blank heat-resistant 3D phone cases (must have a sublimation coating), blank mugs/ceramic plates, etc.
  • Transfer Paper: Paper printed with sublimation patterns, high-temperature-resistant tape.
  • Auxiliary Tools: Phone-case molds, mug fixtures, etc.
  • Power Supply: 220V or 110V power source.

2. Standard Workflow (3D phone case as example)

  1. Preheat: Power on, set the temperature and time on the control panel (typically 190℃, 360 seconds), and wait for the machine to heat up.
  2. Wrap Pattern: Fix the sublimation-paper pattern onto the blank 3D phone case using high-temperature-resistant tape.
  3. Load Chamber: Open the 108° flip-top, place the wrapped and molded phone case into the chamber, and close the lid.
  4. Vacuum Transfer: Press the Vacuum key; the machine automatically starts suction and vacuuming, then press the countdown key and the machine automatically begins printing.
  5. Vent & Unload: When the countdown ends, the machine automatically vents and emits a "beep" alarm. Open the lid, remove the phone case, peel off the paper, and the transfer is complete.

V. Sales Tips & FAQ

Sales Tips

  • Promote the "One Machine Replaces Ten" Value Concept: Emphasize cost-effectiveness to customers: "Buying one HP-3042 equals buying 1 large flat press, 1 twelve-station mug press, 1 plate press, and 1 3D phone-case press at once. This saves your studio 80% of space and over ten thousand yuan in equipment procurement budget!"
  • Target Personalization Shops & Cross-Border E-commerce: Because it can process multiple phone cases and multiple mugs simultaneously with high-quality, textured imagery, it is especially suited to merchants making "personalized customization" best-sellers—truly the king of productivity.

FAQ

  • Q: Does this machine come with a built-in vacuum pump? Do I need to buy an air pump separately?
  • A: No separate purchase needed. Our HP-3042 already has a built-in high-stability vacuum pump inside the machine. You only need to plug it in to use it—no need to connect an external air compressor as with pneumatic heat presses.
  • Q: Can it wrap ordinary phone cases, or ordinary ceramic mugs?
  • A: No.
    1. All cups and plates must have a "sublimation coating" on the surface for the pattern to transfer;
    2. Phone cases must be heat-resistant 3D phone cases with a sublimation coating. If an ordinary cheap phone case is placed in the 190℃ chamber, it will directly melt and deform.

VI. Media Resources

VII. Commercial Terms

International Trade

  • MOQ: 1 set
  • Payment Method: T/T (100% in advance)
  • Lead Time: Within 7 days
  • Packaging Standard: Ordinary carton
  • Place of origin: WenZhou, Zhejiang, China

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store