Przejdź do treści

BS-5030 Vertical Rotary Blister Sealing Machine

Core Abstract: The BS-5030 Vertical Rotary Blister Sealing Machine is a high-efficiency pneumatic packaging solution designed for mass production in hardware, electronics, medical supplies, and daily necessity industries. Utilizing a 3-station rotary cyclic system, it allows for simultaneous feeding, sealing, and unloading to ensure non-stop operation. Its robust 0.35T pressing force and large 500×300 mm sealing area make it ideal for handling thick PVC/PET blisters and medical-grade Tyvek paper with precision. Engineered for durability and high throughput, this vertical machine supports customizable multi-cavity molds, enabling users to seal multiple products per cycle while maintaining neat, smooth sealing edges.

1. Product Overview

Item Details
Product Name Vertical Rotary Blister Sealing Machine
Model BS-5030
Application Thermal sealing of PVC/PET blister matched with paper card, Tyvek heat pressing sealing; mass blister packaging for hardware, electronic parts, daily necessities and medical supplies
Operation Mode Pneumatic pressing + 3-station rotary table cyclic operation; the machine can be equipped with 3 sets of molds for cycle production
Applicable Industries Large-scale packaging plants, electronic component factories, battery manufacturers, medical supply factories and mass production workshops

2. Core Advantages

  1. 3-station rotary heating structure with three sets of molds for alternate use, supporting non-stop continuous production and high production efficiency
  2. Bottom heating (mold heating) with full uniform width heat sealing design on mold body, finished products have little sealing deformation and neat, smooth sealing edges
  3. Large-size sealing platform, customizable single/multi-cavity molds (1~4 cavities), supporting synchronous packaging of multiple products
  4. Heavy-duty 0.35T pneumatic pressing force for tight sealing without edge leakage, compatible with hard-to-seal materials including thick blisters and DuPont Tyvek paper
  5. Vertical integrated machine structure with heavy and stable body, low vibration and fewer failures during long-time continuous operation
  6. Compatible with 110V/220V dual voltage, 50-60Hz, suitable for factory power supply worldwide
  7. Customizable multi-cavity mold specifications, one machine meets mass production requirements of multiple product types

3. Technical Parameter Table

Parameter Name Specification Value
Model BS-5030
Voltage 220V/380V 50Hz/60Hz
Effective Sealing Area 500×300 mm (19.69×11.81 inch)
Working Air Pressure 0.4–0.8 Mpa
Sealing Pressure 0.35T
Total Machine Power 2000W
Working Speed 10 cycles per minute, 10~15 finished products per minute for mass production
Total Machine Weight 150 KG (330.69 lbs)
Overall Machine Dimension 57×74×156 cm (22.44×29.13×61.42 inch)
Supporting Equipment External air compressor for air supply; rotary table equipped with 3 mold stations

4. Operation Process

  1. The rotary table contains three stations. Operators place products into blisters at the empty station mold, put blisters into mold grooves, then cover with paper card or Tyvek paper.
  2. Rotate the rotary table to move the loaded mold to the heating station for preheating.
  3. Rotate the station to the sealing area, the air cylinder presses down to finish pneumatic thermal sealing.
  4. Keep rotating the table to the unloading station; operators take out finished products and refill materials at the same time for cyclic operation.
  5. Three sets of molds work alternately for feeding, heat sealing and unloading to realize uninterrupted continuous production.

5. Sales Suggestions & Frequently Asked Questions

Sales Suggestions

  1. Target customers with mass production demands; recommend small desktop models for small-batch sample making
  2. For customers with diversified product orders, recommend customized 2~4 cavity multi-cavity molds to improve single machine output
  3. Prioritize BS-5030 for scenarios requiring thick PET blister and medical Tyvek paper card sealing
  4. Customers with self-owned air compressors can put the machine into production directly; customers without air source need to purchase an additional air compressor

Frequently Asked Questions

Q1: Is it mandatory to equip 3 sets of molds for the machine? A1: The machine adopts a 3-station rotary table structure. 3 sets of molds are standard required to realize uninterrupted cyclic production. Molds are customized separately with extra charges.

Q2: How to select the voltage? A2: It supports single-phase 110V/220V power supply. 110V or 220V can be customized for overseas trade orders as required.

Q3: Can multi-cavity molds be customized? A3: The sealing area is 500×300mm (19.69×11.81 inch), and 1/2/3/4-cavity molds can be customized on demand.

Q4: What is the production efficiency? A4: 15-20 sealing cycles per minute, suitable for large-scale mass production.

Q5: Is an air compressor necessary? A5: The machine adopts pneumatic pressing structure, an air compressor with 0.4~0.8MPa air source is essential supporting equipment.

6. Media & Material Library

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store