Przejdź do treści

BS-3180 Vertical Rotary Blister Sealing Machine

Core Abstract: The BS-3180 Vertical Rotary Blister Sealing Machine is an industrial-grade, pneumatic 3-station packaging equipment specifically engineered for continuous, high-volume mass production. It is the ideal packaging solution for large-scale factories, electronic component manufacturers, and medical supply plants processing hardware, batteries, or daily necessities. Featuring a smart 3-station rotary table, operators can simultaneously load, heat-seal, and unload, achieving an impressive output of up to 10 sealing cycles per minute. Utilizing heavy-duty 0.35T pneumatic pressure and an advanced bottom-heating design, this machine perfectly handles demanding materials like thick PVC/PET blisters and Dupont Tyvek, guaranteeing tight, smooth, and leak-proof edges for every single product.

1. Product Overview

Item Details
Product Name Vertical Rotary Blister Sealing Machine
Model BS-3180
Application Thermal sealing of PVC/PET blister with paper card, Tyvek heat sealing; mass blister packaging for hardware, electronics, daily necessities
Operation Mode Pneumatic pressing + 3-station rotary table cyclic operation; machine supports 3 sets of molds for cyclic production
Applicable Industries Large-scale packaging factories, electronic component factories, battery manufacturers, medical supplies plants, mass production workshops

2. Core Advantages

  1. 3-station rotary heating structure with 3 sets of molds for alternating use, enabling non-stop continuous production and high output efficiency
  2. Bottom heating design (mold heating) with uniform full-width heat sealing on mold body, resulting in minimal deformation and neat, smooth sealing edges on finished products
  3. Large-format sealing platen, customizable single/multi-cavity molds (1~4 cavities) to realize simultaneous packaging of multiple products
  4. Heavy-duty pneumatic pressure of 0.35T for tight sealing without edge leakage, compatible with thick blisters, Dupont Tyvek and other hard-to-seal materials
  5. Vertical integrated structure with stable heavy frame (150 KG / 330.69 lbs), resistant to vibration and breakdown during long-hour continuous operation
  6. Dual voltage support (110V/220V, 50-60Hz), compatible with power supply standards of domestic and overseas factories
  7. Customizable multi-cavity molds, one machine meets mass production demands for multiple product types

3. Technical Parameter Sheet

Parameter Name Specification
Model BS-3180
Voltage 220V/380V 50Hz/60Hz
Effective Sealing Area 540×380 mm (21.26×14.96 inch)
Working Air Pressure 0.4–0.8 Mpa
Sealing Pressure 0.35T
Total Machine Power 2000W
Production Speed 10 sealing cycles per minute, 10~15 finished products per minute in mass production
Net Machine Weight 150 KG (330.69 lbs)
Overall Machine Dimension 57×74×156 cm (22.44×29.13×61.42 inch)
Supporting Equipment External air compressor required; rotary table equipped with 3 mold stations

4. Operation Procedure

  1. The rotary table contains three stations. Operators place products into blisters on the empty station mold, fit blisters into mold grooves, then cover with paper card or Tyvek sheet.
  2. Rotate the table to shift the loaded mold to the heating station for preheating.
  3. Rotate the station to the sealing zone, the air cylinder descends to complete pneumatic thermal compression sealing.
  4. Continue rotating the table to the unloading station; operators remove finished goods and reload materials simultaneously for cyclic operation.
  5. Three sets of molds take turns for feeding, heat sealing and unloading to achieve uninterrupted continuous production.

5. Sales Recommendations & FAQs

Sales Recommendations

  1. Prioritize promotion to customers with mass production demand; recommend BS-2030 desktop model for small-batch sampling
  2. For customers with diversified product orders, suggest custom 2~4 cavity multi-cavity molds to boost single-machine output
  3. Recommend BS-3180 as preferred model for thick PET blister and medical Tyvek paper card sealing scenarios
  4. Machines can be put into production directly if customers already have air compressors; additional air compressor purchase required if no air source available

Frequently Asked Questions

Q1: Is 3 sets of molds mandatory for the machine? A1: The machine adopts a 3-station rotary design. 3 sets of molds are required as standard to realize uninterrupted cyclic production; molds are customized and charged separately.

Q2: How to select the correct voltage? A2: Single-phase 110V/220V power supply is supported; custom 110V/220V configuration available for foreign trade orders.

Q3: Can multi-cavity molds be customized? A3: The sealing area measures 540*380mm (21.26×14.96 inch); 1/2/3/4 cavity molds can be customized as requested.

Q4: What is the production efficiency? A4: 10 sealing cycles per minute, with output several times higher than desktop BS-2030 model, ideal for large-scale mass production.

Q5: Is an air compressor necessary? A5: The machine adopts pneumatic compression structure; an air compressor with 0.4~0.8MPa air source is essential supporting equipment.

6. Media & Resource Library

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store