Перейти к содержанию

BS-5070 Vertical Rotary Blister Sealing Machine

Core Abstract: The BS-5070 Vertical Rotary Blister Sealing Machine is an industrial-grade, heavy-duty packaging equipment designed specifically for oversized products in large manufacturing sectors like hardware, auto parts, toys, and medical devices. Featuring a highly efficient dual-station rotary table, it allows operators to load and seal alternately for non-stop, uninterrupted production. Its standout feature is the extra-large 700×500 mm (27.56×19.69 inch) sealing area, powered by a steady 0.35T pneumatic pressing force and a powerful 2500W constant temperature heating system. This setup ensures flawlessly tight, flat, and zero-deformation seals on demanding materials like thick-walled PVC/PET blisters, heavy paper cards, and medical-grade Tyvek, delivering a stable output of 10 cycles per minute for high-volume mass production.

1. Product Overview

Item Details
Product Name Vertical Rotary Blister Sealing Machine
Model BS-5070
Application Heat sealing for large-size PVC/PET blisters + paper cards, Tyvek; blister packaging for large hardware, large home appliance accessories, big toys, and large medical products. Maximum sealing size: 700×500mm (27.56×19.69inch)
Operation Mode Pneumatic pressing + dual-station rotary cycle operation; equipped with 2 mold stations, two sets of molds alternate for uninterrupted production
Applicable Industries Large packaging factories, big auto parts factories, large toy factories, major medical device factories, mass production workshops for oversized products

2. Core Advantages

  1. Dual-station Rotary Structure: Dual-station layout with 2 sets of molds for alternating loading and sealing, enabling continuous non-stop production, ideal for large product packaging.
  2. Equal-width Mold Heat Sealing Process: Bottom mold heating with uniform heat-sealing width, finished products feature minimal deformation, flat and attractive sealed edges, high yield rate.
  3. Extra-large Sealing Table: Effective sealing size 700×500mm (27.56×19.69inch), customizable 1~4 cavity multi-cavity molds, supports single large product packaging or simultaneous sealing of multiple small products.
  4. Standard 0.35T Pneumatic Pressure: Constant 0.35-ton pressing force, firmly seals difficult materials such as thick PET blisters, thick paper cards, medical Tyvek, no edge opening or degumming.
  5. High-power Constant Temperature System: Total power 2500W, fast heating, stable temperature control, uniform heating for large-area sealing, eliminating incomplete local sealing.
  6. Wide Voltage for Global Use: Dual-spec voltage 110V/220V, 50/60Hz, compatible with domestic factories and overseas workshops worldwide.
  7. Full Customization Service: Sealing size, mold cavities, heating method can be customized as required, one machine adapts to various large products of different specifications.

3. Technical Parameters

Parameter Specification
Model BS-5070
Voltage 110V/220V,50Hz/60Hz
Effective Sealing Area 700×500 mm (27.56×19.69inch)
Working Air Pressure 0.4–0.8 Mpa
Sealing Pressure 0.35T
Total Power 2500W
Working Speed 10 cycles/minute, 10~15 pieces/minute for mass production
Net Weight 150 KG (330.69LBS)
Overall Dimensions 160×72×102 cm (62.99×28.35×40.16inch)
Supporting Equipment External air compressor required for air supply; rotary table with 2 mold stations

4. Operation Process

  1. The rotary table has left and right stations: manually load products into blisters at the empty station, place blisters into mold grooves, and cover with paper cards/Tyvek;
  2. Manually rotate the rotary table to move the loaded mold to the heating station for preheating and insulation;
  3. The station rotates to the sealing position, and the cylinder presses down to complete high-temperature pneumatic heat sealing;
  4. The rotary table returns to the unloading station, finished products are manually taken out, and new products are loaded at the empty station simultaneously;
  5. Two sets of molds alternate back and forth for cyclic operation, realizing uninterrupted continuous production of the machine.

5. Sales Suggestions & FAQs

Sales Suggestions

  1. Prioritize promotion to customers producing large products; recommend BS-3180 and BS-5030 models for small and medium-sized products.
  2. For customers producing mixed small products of multiple specifications, recommend customized 2~4 cavity multi-cavity molds to improve single-machine production efficiency.
  3. BS-5070 is the preferred model for large-size medical consumables and thick-wall large blister packaging scenarios.
  4. Customers can put into production with their own 0.4~0.8MPa air compressor; an additional air compressor needs to be purchased if there is no air supply.

FAQs

Q1: Does the machine come with two sets of molds when delivered? A1: The dual-station structure requires 2 sets of molds to achieve cyclic uninterrupted production. Molds are not included in the main machine price and are charged separately for customization.

Q2: How to select the voltage? A2: Supports 110V/220V single-phase. 110V/220V can be customized for foreign trade orders.

Q3: Can multi-cavity molds be made? A3: Sealing area 700*500mm (27.56×19.69inch), 1/2/3/4 cavity molds can be customized, flexibly adjusted according to product size.

Q4: What about the equipment capacity? A4: Standard 10 seals per minute, suitable for low-speed precision packaging of large products, ideal for large-scale large product assembly line production.

Q5: Is an air compressor mandatory? A5: The machine adopts a pneumatic pressurization structure, and an air compressor with 0.4~0.8MPa is a necessary supporting equipment.

6. Media & Material Library

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store