Vai al contenuto

Manual EV Charger Hanging Bracket

The Manual EV Charger Hanging Bracket is an overhead telescopic mounting solution engineered for center parking spots and wall-free environments across residential communities, commercial parking lots, and fleet charging stations. Available in short (1m–1.6m) and long (1.5m–2.1m) variants, it features a dual-material build combining a wear-resistant stainless steel telescopic arm with a heavy-duty powder-coated steel mounting plate. Equipped with a 60 cm adjustable stroke, 7 height-locking gears, and dual tension springs, it provides effortless manual height adjustment while securely suspending charging piles and cables overhead to eliminate floor clutter and vehicle crush hazards.

I. Product Overview

1. Product Category

  • Equipment Name: Manual EV Charger Hanging Bracket
  • Product Model: Short Version (1m–1.6m) / Long Version (1.5m–2.1m)
  • Equipment Positioning: Purpose-built for "center parking spots" and "wall-free" charging dilemmas. Engineered with a dual-material structure combining an "stainless steel core telescopic arm + powder-coated iron mounting plate", this bracket suspends the EV charger and cable overhead or along the ceiling. It allows users to easily pull down the charging connector when needed and retract it overhead after use, entirely solving the problems of lacking a mounting wall and cable clutter in underground parking garages.

2. Applications

  • Industry Applications: EV charger manufacturers, charging station operators (CPO), residential property management, underground parking facilities, and private garage retrofitting.
  • Core Pain Points Solved:
  • Center Parking Spot Charging: Ideal for parking slots flanked by driveways or adjacent cars with no pillars or walls for traditional wall-mounted chargers, achieving seamless overhead/ceiling suspension.
  • Vehicle Crush Prevention: Keeps charging cables suspended above the ground, preventing repetitive tire crushing and abrasion, thereby protecting property and safety.
  • Compatible Charger Types:
  • Seamlessly compatible with wall-mounted EV chargers from major automotive brands including Tesla, NIO, Li Auto, Volkswagen ID, Mercedes-Benz EQC, ORA, Xpeng, and BYD.

3. Core Functions

  • Dual-Material Durability: The sliding telescopic core components are crafted from stainless steel for smooth, wear-resistant motion, while the faceplate uses powder-coated sheet metal for premium aesthetics and impact resistance.
  • 7-Gear Adjustment & Dual Spring Assist: Features a 60 cm adjustable telescopic stroke with 7 lockable height gears for precise positioning. Standardized with 2 heavy-duty tension springs, users can flexibly hook one or two springs based on personal height and strength, ensuring smooth, effortless vertical movement without sudden snapping or dropping.
  • Overhead Suspension to Overcome Wall Limitations: Eliminates reliance on vertical walls, specifically tailored for center parking slots in underground garages to maximize spatial utility.
  • Manual Pull-Down & Overhead Retrieval: Users simply pull down the suspended charging gun to plug into the vehicle, and manually wind or hang the cable back onto the bracket post-charging for a clean setup.
  • Overhead Cable Routing for Enhanced Safety: Keeps charging cables completely suspended to eliminate water pooling, electrical leakage risks, and tire abrasion.
  • Universal Multi-Brand Compatibility: The mounting backplate features multi-spec standard hole patterns designed to accommodate the vast majority of mainstream EV chargers on the market.

II. Core Advantages

  • Stainless Steel & Powder-Coated Metal Synergy: The sliding telescopic tracks are made of rust-free stainless steel for long-lasting, smooth operation, while the exterior faceplate features a high-grade matte powder coat that seamlessly integrates with modern premium parking spaces.
  • Targeted Solution for "Center Parking Spots": Enables seamless installation of private chargers in wall-free center spots, overcoming property restrictions and parking limitations.
  • Factory Direct Value: Sourced directly from the manufacturing origin with solid craftsmanship and genuine materials, supporting bulk procurement and custom engineering dimensions.
  • Simple & Secure Installation: Engineered with a robust mechanical structure and pre-drilled mounting holes secured via heavy-duty expansion bolts for long-term overhead safety.

III. Installation & Operation

1. Standard Workflow

  1. Preliminary Consultation & Planning: Check with property management regarding regulations for running power lines and setting up electricity meters. It is recommended to run ceiling power lines inside rigid conduits and use flexible tubing for the telescopic section.
  2. Drilling & Securing: The top bracket comes pre-drilled with four mounting holes matched with 4 heavy-duty expansion bolts. Professional installers should use a hammer drill on the concrete ceiling or structural beam according to the hole pitch, securing the bracket firmly (Note: Since the bracket framework contains stainless steel parts, installers should use dedicated stainless steel masonry bits).
  3. Mounting the Charger: Secure the EV charger onto the bracket’s mounting faceplate.
  4. Gear & Spring Adjustment: Adjust the height to fit the vehicle owner’s reach using the 7-gear settings and attach the appropriate tension springs.

2. Daily Operation

  • Pull-Down & Charging: Pull the bracket downward to the desired height gear where it locks securely into place for smooth plugging.
  • Retraction & Storage: Once charging is complete and the connector is unplugged, push the bracket back up to its elevated locked position to keep the parking space neat and hazard-free.

IV. Sales Tips & FAQ

Sales Tips

  • Target "Center Spot" Owners Directly: Address the pain point of parking spaces lacking surrounding walls where traditional wall-mounted chargers cannot be installed.
  • Highlight Safety & Ergonomics: Emphasize the 7-gear height locking and dual-spring assist, making it user-friendly for drivers of all heights while eliminating floor cable hazards.

FAQ

  • Q1: Is this bracket compatible with all EV charger brands?
  • A: Yes. The long version features a 30 cm wide mounting plate, and the short version is 32 cm wide. It accommodates mainstream models including Tesla, Volkswagen ID, Mercedes-Benz EQC, ORA, Zeekr, NIO, BYD, Li Auto, and Xpeng. Custom hole patterns are available upon request.
  • Q2: How is it installed and wired?
  • A: The top mounting plate includes 4 pre-drilled holes, secured to the ceiling or structural beam using the included 4 heavy-duty expansion bolts. Consult property management prior to wiring; ceiling runs should use rigid conduits with flexible piping for the moving sections.
  • Q3: Is it secure enough to prevent falling?
  • A: Absolutely secure. Each heavy-duty expansion bolt supports hundreds of kilograms, and the 4-bolt configuration easily withstands thousands of pounds of pull force, providing an exceptionally safe overhead mount.
  • Q4: Is it difficult to pull down or will it snap upward uncontrollably?
  • A: Not at all. It features 2 heavy-duty tension springs for balancing assistance. Depending on individual strength, users can choose to attach either one or two springs. With a 60 cm telescopic travel range and 7 height locking gears, users can smoothly select and lock into their ideal resting height.
  • Q5: How do I choose the correct bracket length? Can it be customized?
  • A: Choose the Short Version (1.0m–1.6m) for ceiling heights under 3.3m, and the Long Version (1.5m–2.1m) for ceiling heights around 3.5m–4.0m. Non-standard customized dimensions are fully supported.

V. Media Resources

VI. Commercial Terms

International Trade

  • MOQ: 1 set
  • Payment Method: T/T (100% in advance)
  • Lead Time: Within 7 days
  • Packaging Standard: Ordinary carton
  • Place of origin: WenZhou, Zhejiang, China

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store