Ana içeriğe geç

TD-043H Up-Slided Double Station Hydraulic Heat Press Machine

Core Abstract The TD-043H is an up-slide double-station hydraulic heat press machine designed for high-volume sublimation transfer onto garments and T-shirts. It is best suited to garment printing factories, customization studios, advertising gift makers, cross-border e-commerce sellers, and medium-to-large batch production lines. Its core advantages include a hydraulic drive that delivers stronger, more stable pressure without an external air compressor—eliminating air-source cost and maintenance—plus a dual-station design where one side presses while the other is loaded in parallel to raise output, and an emergency stop that lifts the plate instantly for safety. A 40×60 cm (15.8×23.6") platen and 3500W power ensure consistent, high-throughput results.

I. Product Overview

1. Product Category

  • Equipment Name: Up-Slided Double Station Hydraulic Heat Press Machine
  • Model: TD-043H
  • Equipment Positioning: Hydraulic up-slide double-station heat press machine. Purpose-built for batch sublimation transfer of garments, T-shirts, and similar items; the hydraulic system provides greater, more stable pressure and requires no external air compressor.

2. Applications

  • Industry Applications: Garment printing factories, personalization customization studios, advertising gift production, cross-border e-commerce sellers, and medium-to-large batch production lines.
  • Printing Scope: Suitable for sublimation transfer on cotton, linen, chemical fiber, nylon, and other textile fabrics; also applicable to flock heat transfer and foam printing processes.
  • Production Scale: Ideal for continuous batch production and studio proofing.

3. Core Functions

  • Hydraulic Auto Pressing: After connecting 220V power and filling hydraulic oil, the heating plate presses down and lifts automatically; pressure is stable and powerful, with no external air compressor needed—saving the cost and maintenance of an air source.
  • Up-Slide Dual-Station Design: Two fixed worktables; slide the upper heating plate between left and right stations via the moving handle. While one side is pressing, the other can be loaded/unloaded simultaneously, reducing waiting time and boosting output.
  • Smart Digital Controller: Temperature, time, and count are shown on a three-way digital display for precise, intuitive setting.
  • Emergency Stop Button: One-button shutdown in abnormal situations; the heating plate lifts immediately to ensure operator safety.

II. Core Advantages

  • Dual-Station Efficiency: Slide the upper heating plate over two worktables via the moving handle; while the operator loads/unloads one side, the other is prepared simultaneously—far more efficient than single-station models.
  • Hydraulic & Powerful: Hydraulic drive replaces pneumatic, delivering greater and more even pressure that does not fluctuate with the air source; no air compressor needed, more stable over long runs with better consistency.
  • Emergency Stop Protection: Equipped with an emergency stop button that immediately cuts motion and lifts the heating plate in emergencies, protecting personnel and equipment.

III. Technical Specifications

Items Specifications
Model TD-043H
Heat Platen Size 40CM×60CM/15.8×23.6"
Power 3500W
Voltage 110V/220V
Temperature Range 0-399°C
Time Range 0-999 S
Packaging Dimension 116×94×84CM/45.7×37×33.1"
Gross Weight 224KG/494LB

IV. Operation & Workflow

1. Required Materials

  • Media: Textiles to be printed, sublimation/transfer paper, patterns printed with sublimation ink.
  • Hydraulic Oil: The machine must be filled with hydraulic oil before use; for first use, fill to the standard oil level per the instructions.
  • Power Supply: 110V or 220V power source; the machine must be reliably grounded.

2. Standard Workflow

  1. Power on and check oil: Connect the 220V power, confirm the hydraulic oil is filled to the standard level, and turn on the power switch.
  2. Parameter Setting:
  3. Set temperature: press ▲ to increase, ▼ to decrease.
  4. Set time: press ▲ to increase, ▼ to decrease.
  5. Once set, the machine begins to heat up.
  6. Preheat: Wait for the machine to heat up to the target temperature.
  7. Place the workpiece and switch stations: The machine alarms when the set temperature is reached.
  8. Hold the moving handle below the control panel and slide the upper heating-plate assembly along the top rail directly above the target station.
  9. Lay the workpiece to be printed (textile + transfer paper) on the other fixed station.
  10. Pressing: Once the heating plate is in position, the hydraulic system presses down automatically; it lifts automatically after the countdown ends, completing one transfer.
  11. Remove the finished product: Take out the workpiece, peel off the transfer paper—printing is complete.

V. Sales Tips & FAQ

Sales Tips

  • Promote Dual-Station Efficiency: Emphasize to customers the two fixed stations and the moving handle that slides the upper heating plate between sides—one side presses while the other is prepared simultaneously, greatly increasing daily output.
  • Promote Hydraulic Stability: Compared with pneumatic models, hydraulic pressure is greater and more even, free from air-source fluctuation; and no external air compressor is needed, saving purchase and maintenance costs.

FAQ

  • Q: Does this machine require an air compressor?
  • A: No. The TD-043H is a hydraulic model with a built-in hydraulic system; it only needs hydraulic oil and a 220V power connection to work, eliminating the purchase, air-hose routing, and daily maintenance of an air compressor.
  • Q: How does the dual-station design improve efficiency?
  • A: The machine has two fixed stations; the upper heating plate is slid between left and right stations via the moving handle. While one side is pressing, the operator can simultaneously load material or take finished products on the other side, reducing idle waiting.
  • Q: What is the difference from the pneumatic TD-043?
  • A: The core difference is the drive method—the TD-043H is hydraulically driven, with greater, more stable pressure and no air compressor needed, while the TD-043 is pneumatic and requires an air compressor. Both share the same 40×60 cm up-slide dual-station structure.

VI. Media Resources

VII. Commercial Terms

International Trade

  • MOQ: 1 set
  • Payment Method: T/T (100% in advance)
  • Lead Time: Within 15 days
  • Packaging Standard: Wooden case (Export standard)
  • Place of origin: WenZhou, Zhejiang, China

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store