انتقل إلى المحتوى

1325 CO2 Laser Engraving Machine

1325 CO2 Laser Engraving Machine

Model: 1325
English Name: 1325 CO2 Laser engraving machine
Core Overview: Industrial-grade flatbed CO2 laser processing platform featuring an ultra-large 1300mm × 2500mm open bed directly accommodating standard 4ft × 8ft sheets. Equipped with a 150W high-power water-cooled CO2 laser tube, XY 3-wire 15 linear guides, and an offline Ruida DSP controller, it is designed for seamless, edge-polished acrylic cutting and heavy-duty non-metal sheet fabrication.

I. Product Overview

  • Product Category: Industrial Laser Processing Equipment / Large-Format Open Flatbed CO2 Laser Cutting and Engraving Machine.
  • Target Applications: Large-scale outdoor advertising signs, acrylic displays, architectural panels, exhibition stands, furniture components, and industrial-scale woodworking and craft manufacturing.
  • Core Functions: Powered by a 150W water-cooled CO2 laser source integrated with XY 3-wire 15 linear guide rails and belt transmission. It enables pre-cut-free full-sheet processing, deep vector cutting, high-speed raster engraving up to 1000mm/s, 256-color layered output, and 180° slope 3D relief engraving.

II. Core Advantages

  1. Ultra-Large Processing Capability (Large-Format Advantage)
  2. Full-Sheet Direct Processing: The 1300mm × 2500mm bed dimension matches standard international sheet sizes (4ft × 8ft / 1220mm × 2440mm). Raw acrylic, MDF, and plywood sheets can be placed directly onto the bed without preliminary cutting, minimizing material waste and manual labor.

  3. Seamless One-Piece Fabrication: Eliminates segmented cuts and joints for massive outdoor signages and large furniture parts, ensuring structural continuity and aesthetic appeal.

  4. Powerful 150W Cutting Power (Engineered for Acrylic & Thick Boards)

  5. Designed for Heavy Non-Metals: Equipped with an industrial 150W water-cooled laser tube that delivers high energy density and penetration.

  6. Flame-Polished Edge Finish: Cuts through 20mm+ acrylic sheets with clean verticality. It yields crystal-clear, smooth, "flame-polished" edges on acrylic directly from the cut, eliminating secondary polishing procedures.

  7. Open Flatbed Design for Unrestricted Material Handling

  8. Full-Access Loading: Unlike enclosed cabinet machines, the unobstructed open flatbed allows operators to load and unload materials freely from the front, rear, and both sides.

  9. Forklift & Crane Friendly: Accommodates oversized or heavy raw sheets loaded directly via forklifts, suction lifters, or overhead cranes, reducing physical workload and board damage.

  10. Industrial-Grade Heavy-Duty Frame

  11. Vibration-Damping Solid Bed: Weighing 760 kg net, the heavy-duty welded steel bed absorbs mechanical inertia during high-acceleration toolpaths.
  12. Precision Motion Assemblies: Employs XY 3-wire 15 linear guides and reinforced timing belts. Driven by Ruida DSP algorithms, it maintains repeatability within ≤ ±0.01 mm across the entire 2.5m span.

III. Operation Process

  1. Artwork Preparation & Import: Prepare artwork in CorelDraw, AutoCAD, or Photoshop. Export files in supported formats (DXF, PLT, AI, BMP) and transfer them to the Ruida offline controller via USB or direct cable.
  2. Material Setup & Zero Pointing: Place the sheet flat onto the blade cutting table using mechanical aids or manual positioning. Set the workpiece origin using the red dot pointer.
  3. Focal Alignment & Pre-Run Inspection: Adjust nozzle clearance using the focus gauge. Turn on the industrial water chiller, verify water temperature is between 5°C and 35°C, and start air assist and ventilation blowers.
  4. Execution & Direct Unloading: Run the job directly via the Ruida control panel. Once completed, remove finished parts from the open flatbed without enclosure obstructions.

IV. Technical Specifications

Parameter Specification
Model 1325
Laser Type CO2 laser tube, water-cooled
Laser Power 150W
Working Area 1300mm × 2500mm
Engraving Speed 1 – 1000 mm/s
Cutting Speed 1 – 300 mm/s
Repeating Location ≤ ±0.01 mm
Transmission Type Belt transmission
Guide Rail XY 3-wire 15 linear guide
Graphic Format Supported BMP, HPGL(PLT), JPEG, DXF, AI, DST
Software Supported CorelDraw, AutoCAD, Photoshop, Tajima
Control System Ruida USB (Off-line) control system
Water Temperature 5°C – 35°C
Working Voltage 220V 50Hz
Cutting Thickness 0 – 20 mm (Depending on material properties)
Characteristic 256 color layered output / 180-degree Slope Sculpture
Machine Dimensions / Weight 320 × 201 × 114 cm / 760 KG
Packing Dimensions / Weight 330 × 215 × 130 cm / 840 KG

V. Sales Suggestions & FAQ

Sales Suggestions

  • Target Full-Sheet Fabricators: Focus on sign-makers and acrylic display manufacturers. Demonstrate cost savings achieved by eliminating pre-cutting steps and reducing edge trim waste on 4ft × 8ft sheets.
  • Highlight Post-Processing Reductions: Use sample cuts of 10mm–20mm acrylic to showcase clear, smooth flame-polished edge quality that requires no secondary flame or diamond polishing.
  • Facility Requirements Verification: Verify the buyer's workshop entry dimensions (packaging width 215cm), forklift capacity, 220V power supply, and chiller space prior to finalizing the order.

Frequently Asked Questions (FAQ)

  • Q: Can this machine handle full-size 4ft × 8ft panels directly?
  • A: Yes. The working table measures 1300mm × 2500mm, providing clearance for standard 4ft × 8ft (1220mm × 2440mm) sheets without edge trimming.
  • Q: What safety precautions are recommended for the open flatbed design?
  • A: Because there is no top cover, operators should wear certified CO2 laser safety goggles, keep clear boundary walkways around the perimeter, and use dedicated fume extraction hoods.
  • Q: What is the maximum cutting thickness of the 150W laser on acrylic?
  • A: The 150W tube cuts acrylic up to 20mm with consistent edge verticality. Clean cuts above 20mm are achievable with optimal focus calibration and controlled feed rates.

VI. Media Library

VII. Business Terms

【Domestic Terms】

  • Payment Terms: 30% advance deposit upon contract signing; remaining 70% balance payable after factory assembly, laser alignment, and video inspection approval prior to loading.
  • Logistics & Delivery: Shipped via industrial heavy-cargo freight inside a reinforced wooden crate (Packing Dimension: 330 × 215 × 130 cm; Gross Weight: 840 KG). Customer must arrange forklift unloading on site.
  • Warranty & Service: 1-year warranty on core structural and electronic components (consumable laser tube and optics covered under standard manufacturer terms); lifetime remote technical and optical alignment support.

【International Terms】

  • Payment Terms: 30% T/T deposit upon order confirmation; 70% balance paid after production and test-cutting video verification prior to dispatch.
  • Lead Time: 10 to 15 working days following deposit clearance and electrical specification confirmation.
  • Export Packaging: ISPM-15 compliant export plywood crate with internal moisture-barrier wrapping and corner protection (330 × 215 × 130 cm; 840 KG).
  • Trade Terms: Supports EXW, FOB (Ningbo/Shanghai), CIF, CFR, and Door-to-Door DDU/DDP ocean freight.
  • Warranty & Support: 12-month global warranty on non-wear components; complete English manuals, circuit schematics, software presets, and 24/7 video troubleshooting support.