Lewati ke isi

TD-043 Up-Slided Double Station Pneumatic Heat Press Machine

Core Abstract The TD-043 is an up-slide double-station pneumatic heat press machine designed for high-volume sublimation transfer onto garments, T-shirts, and textiles, as well as low-temperature, low-pressure lamination. It is best suited to garment printing factories, customization studios, advertising gift makers, cross-border e-commerce sellers, and small-batch production lines. Its core advantages include a dual-station design—two fixed worktables with an upper heating plate slid between them via a handle, so loading and pressing run in parallel to raise output—plus pneumatic auto press/lift that removes manual effort, manual/auto dual modes, and an emergency stop for safety. A 40×60 cm (15.8×23.6") platen, 3500W power, and 6 kg/cm² max air pressure deliver stable, consistent results.

I. Product Overview

1. Product Category

  • Equipment Name: Up-Slided Double Station Pneumatic Heat Press Machine
  • Model: TD-043
  • Equipment Positioning: Pneumatic up-slide double-station heat press machine. Purpose-built for batch sublimation transfer of garments, T-shirts, and apparel, as well as low-temperature, low-pressure lamination processes.

2. Applications

  • Industry Applications: Widely used in garment printing factories, personalization customization studios, advertising gift production, cross-border e-commerce sellers, and small-batch production lines.
  • Printing Scope: Suitable for sublimation transfer on cotton, linen, chemical fiber, nylon, and other textile fabrics; also applicable to flock heat transfer, foam printing, and low-temperature/low-pressure lamination of garments and linings.
  • Production Scale: Ideal for small-to-medium batch continuous production, online-store customization, and studio proofing.

3. Core Functions

  • Pneumatic Auto Pressing: Once connected to an air compressor, the heating plate presses down and lifts automatically—effortless to operate with stable pressure.
  • Up-Slide Dual-Station Design: Two fixed worktables; slide the upper heating plate between left and right stations via the moving handle. While one side is pressing, the other can be loaded/unloaded simultaneously, reducing waiting time and boosting output.
  • Smart Digital Controller: Temperature and time are set via digital display for simple, intuitive operation.
  • Emergency Stop Button: One-button shutdown in abnormal situations to ensure operator safety.

II. Core Advantages

  • Dual-Station Efficiency: Slide the upper heating plate over two worktables via the moving handle; while the operator loads/unloads one side, the other is prepared simultaneously—far more efficient than single-station models.
  • Pneumatic & Stable: Air pressure drives the heating plate up and down automatically, eliminating the need to repeatedly press a handle by hand—less tiring over long runs with stable pressure output.
  • Manual & Auto Mode: Manual mode requires pressing the manual button to press down; in auto mode the heating plate presses automatically once in position—suiting different working habits.
  • Emergency Stop Protection: Equipped with an emergency stop button that immediately cuts motion in emergencies, protecting personnel and equipment.

III. Technical Specifications

Items Specifications
Model TD-043
Heat Platen Size 40CM×60CM/15.8×23.6"
Power 3500W
Voltage 110V/220V
Temperature Range 0-399°C
Heating Up Time 15-30 minutes
Pressure Output 6kg/cm²(Max)
Packaging Dimension 116×94×84CM/45.7×37×33.1"
Gross Weight 172KG/379LB

IV. Operation & Workflow

1. Required Materials

  • Media: Textiles to be printed, sublimation/transfer paper, patterns printed with sublimation ink.
  • Air Supply: Air compressor and air hose; recommended working pressure 3–6 kg/cm².
  • Power Supply: 110V or 220V power source.

2. Safety Notes

  • Before powering on, check that all parts are secure and confirm the air and power connections are normal.
  • The machine must be connected to a safe, reliable ground wire.
  • Do not touch the heating plate during heating or operation to avoid burns.
  • Do not place hands on the worktable while the machine is running, to prevent crushing or burns.
  • Before mass production, always test the optimal time, temperature, and pressure with a sample first.
  • The temperature controller is complex; except for temperature and time settings, do not adjust other parameters to avoid program errors or equipment damage.

3. Standard Workflow

  1. Connect air and power: Connect the air compressor, switch on the 220V power, open the air valve, and adjust the air pressure to the required range (about 3–6 kg/cm²).
  2. Parameter Setting: Turn on the power switch.
  3. Set temperature: press ▲ to increase, ▼ to decrease.
  4. Set time: press ▲ to increase, ▼ to decrease.
  5. Once set, the machine begins to heat up.
  6. Preheat: Wait for the machine to heat up to the target temperature (about 15–30 minutes).
  7. Place the workpiece and switch stations: The machine alarms when the set temperature is reached.
  8. Hold the black moving handle below the control panel and slide the upper heating-plate assembly along the top rail directly above the target station.
  9. Lay the workpiece to be printed (textile + transfer paper) on the other fixed station.
  10. Pressing:
  11. Auto mode: The heating plate presses down automatically once in position; it lifts automatically after the countdown ends, completing one transfer.
  12. Manual mode: Press the manual button on the control panel; the heating plate presses down and lifts automatically after the countdown ends.
  13. Remove the finished product: Take out the workpiece, peel off the transfer paper—printing is complete.

V. Sales Tips & FAQ

Sales Tips

  • Promote Dual-Station Efficiency: Emphasize to customers the two fixed stations and the moving handle that slides the upper heating plate between sides—one side presses while the other is prepared simultaneously.
  • Promote Pneumatic Labor-Saving: Compared with manual presses, the pneumatic model is easier for long runs, with stable pressure output and better consistency.
  • Promote Manual/Auto Dual Mode: Manual mode is button-controlled; auto mode presses on arrival—convenient for customers to choose based on output and habits.

FAQ

  • Q: How does the dual-station design improve efficiency?
  • A: The machine has two fixed stations; the upper heating plate is slid between left and right stations via the moving handle. While one side is pressing, the operator can simultaneously load material or take finished products on the other side, reducing idle waiting.
  • Q: How long does heating up take?
  • A: About 15–30 minutes, depending on ambient temperature and the target temperature.

VI. Media Resources

VII. Commercial Terms

International Trade

  • MOQ: 1 set
  • Payment Method: T/T (100% in advance)
  • Lead Time: Within 10 days
  • Packaging Standard: Wooden case (Export standard)
  • Place of origin: WenZhou, Zhejiang, China

Request a Quote & Purchase

🛒 Click here to view pricing and purchase on our official store